Drivers Pericom Port Devices

Pericom Generic Serial Port Device drivers for Windows 7 x64. Install drivers automatically. DriverPack software is absolutely free of charge.

• Install Pericom Generic Serial Port Device driver for Windows 7 x64, or download DriverPack Solution software for automatic driver installation and update.
• On Windows 10, a device driver is an essential piece of code, which allows the system to interact with a specific hardware (such as graphics card, storage driver, network adapter, Bluetooth, etc.

Integrated Circuits (ICs) LQFP-128

PCI\\VEN_12D8&DEV_7952&SUBSYS_DDDDDDDD&REV_00

PI7C9X113 Product Details

The PI7C9X113 parts manufactured by PERICOM are available for purchase at Jotrin Electronics website. Here you can find a wide variety of types and values ​​of electronic parts from the world's leading manufacturers. The PI7C9X113 components of Jotrin Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.
The production status marked on Jotrin.com is for reference only. If you did not find what you were looking for, you can get more value information by email, such as the PI7C9X113 Inventory quantity, preferential price, and manufacturer. We are always happy to hear from you so feel free to contact us.

Technical Parameters

PI7C9X113 Related Products

The PI7C9X112SLFDE is IC PCIE-PCIX BRIDGE LQFP, that includes PI7C9X112 Series, they are designed to operate with a Bridge - PCIe to PCI Type, Packaging is shown on datasheet note for use in a Tray, that offers Unit Weight features such as 0.032985 oz, Mounting Style is designed to work in SMD/SMT, as well as the 128-LQFP Package Case, the device can also be used as Surface Mount Mounting Type. In addition, the Applications is PCI-to-PCI Bridge, the device is offered in PCI Express Interface, the device has a 3.3V of Voltage Supply, and Supplier Device Package is 128-LQFP (14x14), and the Number of Ports is 1 Port, it has an Maximum Operating Temperature range of + 85 C, it has an Minimum Operating Temperature range of - 40 C, and Operating Supply Voltage is 3.3 V, and the Data Bus Width is 32 bit, and Maximum Clock Frequency is 66 MHz, and the Number of Lanes is 1 Lane.

The PI7C9X111SLBFDEX is IC PCIE-PCIX BRIDGE 128LQFP, that includes 3.3V Voltage Supply, they are designed to operate with a 0.032985 oz Unit Weight, Type is shown on datasheet note for use in a Bridge - PCIe to PCI, that offers Supplier Device Package features such as 128-LQFP (14x14), Series is designed to work in PI7C9X111, as well as the Tape & Reel (TR) Alternate Packaging Packaging, the device can also be used as 128-LQFP Package Case. In addition, the Operating Supply Voltage is 3.3 V, the device is offered in 1 Port Number of Ports, the device has a 1 Lane of Number of Lanes, and Mounting Style is SMD/SMT, and the Mounting Type is Surface Mount, and Maximum Clock Frequency is 66 MHz, and the Interface is PCI Express, and Data Bus Width is 32 bit, and the Applications is PCI-to-PCI Bridge.

The PI7C9X111SLBFDE is IC PCIE-PCIX BRIDGE 128LQFP, that includes PCI-to-PCI Bridge Applications, they are designed to operate with a 32 bit Data Bus Width, Interface is shown on datasheet note for use in a PCI Express, that offers Maximum Clock Frequency features such as 66 MHz, Mounting Type is designed to work in Surface Mount, as well as the SMD/SMT Mounting Style, the device can also be used as 1 Lane Number of Lanes. In addition, the Number of Ports is 1 Port, the device is offered in 3.3 V Operating Supply Voltage, the device has a 128-LQFP of Package Case, and Packaging is Tray Alternate Packaging, and the Series is PI7C9X111, and Supplier Device Package is 128-LQFP (14x14), and the Type is Bridge - PCIe to PCI, and Unit Weight is 0.032985 oz, and the Voltage Supply is 3.3V.

PI7C9X111SLBEVBR with EDA / CAD Models manufactured by Pericom. is part of the Evaluation and Demonstration Boards and Kits, , and with support for Interface Development Tools 9X111SLB Reverse Board.

PI7C9X112SLEVBF5 with PDF manufactured by Pericom. is part of the Evaluation and Demonstration Boards and Kits, , and with support for Interface Development Tools Forward Eval Board, PI7C9X112SL FORWARD EVAL BOARD.

• ModelsDescriptionOperation
• PI7C8154BNAEPeripheral Drivers & Components (PCIs), DIODES, PBGA-304
• PI74STX1G14CXtubes, DIODES, SOT353
• PI74ST1G08CEXLogic Gates, DIODES, SC-70
• PI7C8150AND-33Specialized, DIODES, DC0343 PACKAGE TRAY
• PI74STX1GU04CEXInverters, DIODES, SC70-5

Ratings and Reviews

• 0 / 5

• 5 Stars 0%
• 4 Stars 0%
• 3 Stars 0%
• 2 Stars 0%
• 1 Stars 0%

Payment:

Shipping & Payment

Shipping

Processing Time：Shipping fee depend on different zone and country.

Payment

We provide high quality products, thoughtful service and after sale guarantee

• We have rich products, can meet your various needs.

• Minimum order quantity starts from 1pcs.

• Lowest international shipping fee starts from US$2.00.

• 90 days quality guarantee for all products.

Packing

• Step1:Product

• Step2:Vacuum packaging

• Step3:Anti-static bag

• Step4:Individual packaging

• Step5:Packaging boxes

• Step6:bar-code shipping tag

All the products will packing in anti-staticbag. Ship with ESD antistatic protection.

Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.

We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.

After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

Guarantees

1.We provide 90 days warranty.

2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.

FAQ:

Q: How does Jotrin guarantee that PI7C9X113 is the original manufacturer or agent of PERICOM?

We have a professional business development department to strictly test and verify the qualifications of PERICOM original manufacturers and agents. All PERICOM suppliers must pass the qualification review before they can publish their PI7C9X113 devices; we pay more attention to the channels and quality of PI7C9X113 products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.

Q: How to find the detailed information of PI7C9X113 chips? Including PERICOM original factory information, application, PI7C9X113 pictures?

You can use Jotrin's intelligent search engine, or filter by Integrated Circuits (ICs) category, or find it through Pericom Semiconductor Corp (Diodes Inc) Information page.

Q: Are the PERICOM's PI7C9X113 price and stock displayed on the platform accurate?

The PERICOM's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for PI7C9X113, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.

Q: Can I place an order offline?

Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click 'My Orders' to enter the transaction management, and you will see the 'Order Details' interface. After checking it, select all and click 'Place Order'. In addition, you can enjoy coupons or other selected gifts when placing orders online.

Q: What forms of payment can I use in Jotrin?

TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.

Q: How is the shipping arranged and track my package?

Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days.

Q: What is the process for returns or replacement of PI7C9X113?

All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the PI7C9X113 we delivered, we will accept the replacement or return of the PI7C9X113 only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of PI7C9X113.
(3)The PI7C9X113 is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy.

Q: How to contact us and get support, such as PI7C9X113 datasheet pdf, PI7C9X113 pin diagram?

Need any After-Sales service, please feel free contact us: sales@jotrin.com

Pericom Semiconductor Corp (Diodes Inc)

• PI74STX2G4245UEX 2-Bit Level Shifting Buffer/Transceiver with Configurable Dual Supply VoltageDIRB243A2B176,Bus Transceivers 2B Level Shifting Buffer
• PI7C8150BMAE ASYNCHRONOUS 2-PORT PCI-TO-PCI BRIDGE,Peripheral Drivers & Components (PCIs) 32-Bit PCI Bridge 2 Port
• PI7C9X110BNBE IC PCIE TO PCI REV BRG 160LFBGA,Peripheral Drivers & Components (PCIs) PCIe-to-PCI Reversible Bridge
• PI7C8152BMAE IC PCI-PCI BRIDGE 2PORT 160-MQFP,Peripheral Drivers & Components (PCIs) PCI -to -PCI Bridge 2 Port
• PI7C8150AMAE-33 2-PORT PCI-to-PCI BRIDGE,Peripheral Drivers & Components (PCIs) 2 Port PCI Bridge
• PI7C8154ANAE Peripheral Drivers & Components (PCIs) 64B/66MHz 2 Port PCI Bridge

The ReDriver, also known as repeater IC, regenerates signals to boost the signal quality of high-speed interfaces. Faster signal frequencies leave designers with less signal margin with which to design reliable, high-performance systems. Using equalization, pre-emphasis, and other technologies, a single Redriver can adjust and correct for known channel losses at the transmitter and restore signal integrity at the receiver. This results in an eye pattern at the receiver with the margins required to deliver reliable communications with low bit error rates (BER).

Redrivers (repeater IC) are a key technology for addressing the rising design complexity that the higher data rates of today’s high-speed interconnects introduce across every industry and protocol.

To enable better signal integrity throughout the signal chain, Diodes Incorporated provides redrivers based on its industry-leading signal conditioning technology. Redrivers offer better performance then protocol-based signal repeaters which act as an endpoint that must terminate and then retransmit the signal, thus introducing delay and added system cost. In addition, redrivers minimize jitter by conditioning and passing signals through at the physical layer.

Related Links

• Online Article: 11 Myths about ReDriver Signal-Conditioning Products NEW!
• White Paper: Overcoming Advanced Signal Integrity Issue In High-Speed System

• Diodes Incorporated USB 3.0 ReDriver

• ONLINE: PCIe/USB 3.0 ReDriver Product Training Module - New!!

Signal Integrity - ReDrivers/Repeaters/Signal Conditioners Details

Diodes ReDrivers address the five major issues negatively impacting the signal integrity of high-speed interfaces:

Signal Attenuation: High-speed signals, including differential signals, introduce noise and jitter that causes signal voltage swings to overshoot or undershoot the optimal eye opening. This results in a degraded signal during high-speed signal switching.

Signal Strength: Interfaces are increasingly being integrated into CPU chipsets. While providing excellent performance in the lab, many of these chipsets are often not strong enough to provide reasonable design margin to meet compliance specs when designed into real-world systems with multi-layer boards, long traces, and extended cable lengths.

Signal Distance: Layout constraints, controller-to-connector separation, multiple PCB layers, vias, daughterboard connectors, and extensive cable lengths all contribute to signal distance and greater signal degradation. For example, signal losses over FR4 PCB traces are typically 0.3dB per inch at 2.5 Gbps and 0.9 dB at 8 Gbps.

Noise: Both random and deterministic noise degrade signal integrity from a variety of sources, including crosstalk from other signals. Another common source of random jitter is a noisy clock source that does not have good isolation or has impedance mismatches.

Lack of end-to-end control: When an interface connects to an external subsystem or device, designers do have not control over the signal distance, board vias, connectors, and cables over which the signal must still pass to reach its destination. This can increase noise, jitter, attenuation, and insertion losses, and cause otherwise well-designed devices to fail to interface to equipment from other manufacturers.

The challenge for OEMs is that, as signal speeds increase, these factors become more pronounced, causing reliability, throughput, and quality to suffer. To help developers maintain signal integrity, Diodes offers unparalleled signal conditioning technology with a comprehensive portfolio of devices for PCI Express, USB, Thunderbolt, SAS/SATA, Bluetooth, Wi-Fi, HDMI, and other popular standards. Benefits include:

Superior Signal Quality: Diodes ReDrivers have the lowest jitter and attenuation for the highest performance in the industry. Comparative studies are available under NDA.

Lowest Crosstalk: By minimizing crosstalk, Diodes keeps channel-to-channel and part-to-part skew low.

Highly configurable: To provide developers greater flexibility, Diodes' ReDrivers can be configured on a per channel basis via an MCU over I2C rather than having to be pinstrapped or hardwired like other technologies.

Power Efficiency: These devices are architected for both low power operation and efficient power consumption. For example, Diodes' SAS/SATA redrivers consume less than 100 mW per channel and have the best power efficiency on the market.

Multi-port: Diodes' redrivers support a variety of multi-channels configurations, providing flexibility while enabling greater integration and cost savings.

Multi-protocol: Diodes' is the only manufacturer in the industry to offer a comprehensive portfolio of redrivers that work in both SATA and SAS environments.

Flexible packaging: Diodes' redrivers come in a variety of packaging options to meet the specific cost, performance, and power needs of your application. With devices on the order of 4 mm x 4 mm, these redrivers can be placed close the interface connector to minimize signal losses.

Improving signal integrity increases the overall signal margin of systems. OEMs can use this increased signal margin to:

• Improve signal reliability and robustness
• Increase the maximum trace distance and/or cable lengths over which signals can reliably be run
• Reduce the number of board layers required to isolate signals effectively and substantially lower system cost
• Ensure connectivity regardless of the quality of the external device to which a system is connected
• Increase flexibility to simplify design, speed time-to-market, and reduce system cost by being able to use lower precision components elsewhere in the signal chain.

Diodes' is the market leader in redriver technology across applications, including networking, embedded computing, and communications, among others. For example, in the server market, Diodes' was the first redriver manufacturer to achieve SATA3 compliance, and its technology has been adopted in more than 80% of server storage designs. Diodes' redrivers are also part of many controller vendor reference designs, including Intel.

As part of its commitment as the signal integrity leader, Diodes' offers unparalleled design support to its customers, including availability of evaluation boards, professional schematic and layout review, and system simulation to optimize the key opening using S-Parameter models, AMI-IBIS, or HSPICE.

High speed SAS 2.0, SATA 3.0, PCIe 2.0,PCIe 3.0, USB 3.0, DP 1.1 and DP 1.2

• Increased signaling distance
• Increased design flexibility
• Standards compliance
• Improved performance
• Increased reliability
• Reduced PCB & cable cost
• Unique, differentiatted products to maximize the protocol's potential

Signal Integrity - ReDrivers/Repeaters/Signal Conditioners FAQs

Yes, Pericom 3.0 ReDriversPI3EQX8908A2, can be used in PCIe 1.0 and 2.0 modes.

Pericom PCIe 1.0 ReDriver™ does include a PCIe CLK buffer but neither the PCIe 2.0 nor 3.0 ReDriver includes a
PCIe CLK buffer.

Yes, Please contact your sales representative for simulation model and reference circuit. or contact Pericom Customer Support.

Our PCIe 3.0 ReDriver can perform output (ReDriver's TX) side 50-Ohm termination detect. The ReDriver's RX50 pin is asserted high once the device detects the 50-Ohm termination.

The PCIe ReDriver provides the signal output pin, 'SIG', to indicate that signal is passing through the ReDriver.

Drivers Pericom Port Devices Free

Pericom PI3EQX7701 EQ can compensate 5 db and 11db loss (2.5 GHz or 5 Gb/s).

Please refer the AN233, page 5 and page 9.

No. USB 3.0 uses different connect pins from USB 2.0's. The USB 3.0 Standard-B receptacle interfaces are divided into two sets of interfaces: the USB 2.0 interface and the USB 3.0 SuperSpeed interface. The USB 2.0 interface is comprised of pins 1 to 4, and the USB 3.0 SuperSpeed interface is comprised of pins 5 to 9. The figure below shows the footprint of USB3.0 found in 'Universal Serial Bus 3.0 Specification Version 1.0_Page 5-19_Figure5-8'.

Not all obsolete parts will have a direct replacement. However, we recommended that you contact your regional sales office.

Yes, AN088 and AN233 are Application Notes for PCIe ReDrivers.

1Mohm pull down resistor on Pin 13 is needed on Dual Mode DP Source Device.

There are several types of jitter, but the main ones are: cycle-to-cycle jitter, period jitter, half period jitter, and peak-to-peak jitter. Jitter terminology can be found in AB36: Jitter Measurement Techniques at Application Brief No. 36 or Application Note No. 27.

Both I2C and GPIO controls are provided.

Emphasis control can improve USB3.0 ReDriver's output signal.
The integrated de-emphasis circuitry provides flexibility and improves the integrity of USB3.0 output signal after ReDriver.
The de-emphasis selection table below describes pin strapping options and associated de-emphasis operations. This table can be found in datasheet, page 3.

Emphasis control improves the PCIe ReDriver output signal.

EQ control can improve the USB3.0 ReDriver's input signal. The integrated equalization circuitry provides flexibility and improves the integrity of the USB3.0 input signal before the ReDriver. The Equalizer Selection table below describes pin strapping options and associated operations of the equalizer. This table can be found in PI3EQX7741AI datasheet, page 3.

Swing control can adjust the ReDriver IC output swing level.

Cycle-to-cycle jitter is the difference in the clock's period between two consecutive cycles and is expressed in units of + pico-seconds. This is because it can be either leading or lagging from the ideal output waveform.

A switch is a passive device with C-on and R-on that will attenuate the signal. A logic driver is an active device that will refresh an input signal at output by its active driving ability. Thus, compared to a logic driver, the maximum frequency of an application using a switch is limited by the trace length and the capacitive load. It is recommended to use a logic driver for applications with heavy capacitive load, long trace and high frequency.

The range of the impedance is from 75Ω to 105Ω.

All Pericom's products that are not lead-free are composed of 85% Sn and 15% Pb. For lead-free products, they are composed of 100% matte Sn. Lead-free products are marked and ordered with the letter 'E' suffix at the end of the part number.

The minimum input swing level is shown in the specification 'CML input Differential Input Peak-to-peak Voltage' and some ReDrivers can automatically select the input threshold voltage.

EQ control can improve the PCIe ReDriver input signal.

Cached

PCI\\VEN_12D8&DEV_7952&SUBSYS_DDDDDDDD

No, Pericom PCIe ReDriver will not block any PCIe signals. The ReDriver only enhances gains of the data voltage without changing the data. The host always sees the end-point directly. Pericom ReDriver is '100% transparent', which means the 'host' and 'end-point' do not detect the presence of the ReDriver.

FIT and MTBF data can be found at Pericom's Quality webpage.

Drivers Pericom Port Devices List

Lead (Pb)-Free and Green information can be found on individual datasheets or Pb-Free & Green Page.