-->
This article helps to fix an issue in which Windows 10 doesn't install specific drivers for USB audio devices on the first connection.
Download Mobile Phones drivers for Windows, firmware, bios, tools, utilities. Download Qisda Mobile Phones drivers, firmware, bios, tools, utilities. Qisda Boston Android MTP Device Driver 1.0.0.0 for XP 35 downloads. Mobile Phones Qisda. Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series. Intel Core i3 or similar, 2 GB RAM; USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit. Going into the properties of the Bluetooth USB Host Controller the device status reads: 'The drivers for this device are not installed. (Code 28) There are no compatible drivers for this device. To find a driver for this device, click Update Driver.' Doing this brings me back to my first point.
Original product version: Windows 10, version 1703
Original KB number: 4021854
Qisda USB Devices Driver
Symptom
When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.
Cause
This issue occurs because the USB audio 2.0 driver (usbaudio2.sys) isn't classified as a generic driver in Windows 10 Version 1703. Therefore, the system assumes that a compatible, nongeneric driver is installed for the device even though the driver is generic.
This issue also causes Windows 10 Version 1703 to postpone the search for other compatible drivers through Windows Update that typically occurs immediately after you install a new device.
Resolution
To fix this issue, use one of the following methods.
Method 1
Qisda Usb Devices Driver Updater
To resolve this issue, install update 4022716.
Method 2
If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10.
Qisda Usb Devices Drivers
Method 3
If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.
Note
See the device manufacturer's user guide for specific instructions about how to install the driver.
Method 4
If the driver isn't distributed through Windows Update, you can manually reinstall the driver. To do this, follow these steps:
- Install the device-specific driver (see Method 2).
- Open Device Manager.
- Right-click (or tap and hold) the name of the device, and then select Uninstall.
- Restart the computer.
When it restarts, Windows will try to reinstall the device by using the device-specific driver.